IC693CPU350-BC燃機模塊

類目：GE
型號：IC693CPU350-BC
全國服務熱線：+86 15270269218
手機：+86 15270269218
微信：+86 15270269218
QQ：3136378118
Email：stodcdcs@gmail.com

在線咨詢

產品詳情

產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等。
主營DCS控制系統備件，PLC系統備件及機器人系統備件，
優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
IC693CPU350-BC燃機模塊

AIE_功能塊在以下情況下可用：可選以太網通信板6安裝在控制器中。它使控制器能夠讀取：以太網上其他站的模擬數據網絡多32個AIE_塊可用。積木是按順序分配，控制器范圍，每次使用。
數據可以作為實浮點數接收并直接傳遞到塊輸出O1，或可以作為16位整數獲得。浮點數字可以用以下四種方法之一格式化：如下一頁的表1所示。整數是按小值換算為浮點INT&大INT和小刻度&MAXSCALE參數。都是無符號整數（Uint）&有符號整數（Sint）選項可用。見下一頁的表2。選擇數據類型時，范圍限制（參見表2）自動輸入。這確保：用戶輸入的整數值在正確的范圍內。必須輸入小整數和大整數值
每當數據類型改變時。
輸出或包含浮點塊輸出O1的范圍縮放?；蜉敵鍪且环N特殊的數據類型
包括MINSCALE、MAXSCALE、DPP和ENGUNITS，并可連接到其他塊
具有范圍（RG PTR）輸入。范圍縮放信息可以從
如果設備具有與數據打包的縮放信息，則通過以太網傳輸數據。這是由提供的功能
其他西門子摩爾控制器的AOE功能塊。通過使用Modbus定義AOE塊
下表3中的寄存器。如果此功能不可用，則范圍參數的默認設置為“MAN”
應該使用。在這種情況下，范圍參數是手動輸入的。使用自動范圍功能時，范圍
如果在線改變AOE范圍，AIE塊可能會失去同步數秒。
IP地址參數用于配置源設備的IP地址。MB ADRES參數允許配置Modbus地址。當連接到其他西門子摩爾控制器時，Modbus地址設置為1。在某些情況下，其他設備可能使用不同的地址，或者在通過Modbus時TCP/IP網關Modbus網絡可能有多個設備，每個設備都有一個的地址。REG類型
參數允許將源寄存器設置為保持寄存器或輸入寄存器。對于許多Modbus設備，
此設置無關緊要，因?yàn)樵O(shè)備將它們視為相同的寄存器。數據類型參數將：
啟用AIE塊以獲取浮點或整數數據。當選擇浮點時，控制器
將請求從MB REG參數開始的兩個連續寄存器。UD速率參數配置：塊請求數據的速率。P2P設置將以P2P速率設置的速率更新數據
以太網塊中的參數。Ct設置將在控制器的循環時間更新數據。Ct參數通常僅在模擬輸入為PID控制回路中的過程變量時使用
輸出QS指示接收數據的質量，當數據不好時，輸出QS將變高（1）。這通常是與由于通信故障或源的錯誤配置而無法接收數據相關。AIE_ function blocks are available when the optional Ethernet communication board6 is installed in the controller. It enables the controller to read analog data from other stations over the Ethernet network. Up to 32 AIE_ blocks are available. Blocks are assigned in sequence, controller wide, with each use. Data can be received as a real floating-point number and is passed to the block output O1 directly or it can be obtained as a 16-bit integer. A Floating Point number can be formatted in one of four methods as shown in table 1 on the next page. An integer is converted to floating point as scaled by the MIN INT & MAX INT and the MINSCALE & MAXSCALE parameters. Both Unsigned Integer (Uint) & Signed Integer (Sint) options are available. See table 2 on the next page. When A DATA TYP is selected, range limits (see table 2) are automatically entered. This ensures that the user-entered integer values fall within the correct range. MIN INT and MAX INT values must be entered whenever a DATA TYP is changed. Output OR contains the range scaling for the floating point block output O1. The OR output is a special data type that includes the MINSCALE, MAXSCALE, DPP, and the ENGUNITS and can be connected to other blocks having a Range (RG PTR) input. Range scaling information can be automatically obtained from the source of the data over Ethernet if the device has the scaling information packaged with the data. This is a feature provided by AOE function blocks from other Siemens MOORE controllers. AOE blocks are defined by using the Modbus Registers from table 3 below. If this feature is not available, the default setting of the RANGE parameter "MAN" should be used. In this case, range parameters are entered manually. When the auto range feature is used, the range in the AIE block may be out of sync for several seconds if on line changes are made to the AOE range. The IP ADRES parameter is used to configure the IP address of the source device. The MB ADRES parameter allows a Modbus address to be configured. When connecting to other Siemens MOORE controllers the Modbus address is set to 1. In some cases, other devices may use a different address or when going through a Modbus TCP/IP gateway a Modbus network may have multiple devices, each having a unique address. The REG TYP parameter allows setting the source register as a Holding Register or an Input Register. For many Modbus devices, this setting does not matter since the device will treat them as identical registers. The DATA TYP parameter will enable the AIE block to acquire both floating point or integer data. When floating point is selected the controller will request two consecutive registers starting with the MB REG parameter. The UD RATE parameter configures the rate at which the block will request data. The P2P setting will update the data at the rate set by the P2P RATE parameter in the ETHERNET block. The Ct setting will update the data at the cycle time of the controller. The Ct parameter should normally be used only when the analog input is the process variable in a PID control loop Output QS indicates the quality of the received data and will go high (1) when the data is bad. This is normally associated with failure to receive data due to a communication failure or a misconfiguration of the source.

相關產品