YASKAWA CIMR-J7AU40P7伺服驅動電機模塊

類目：YASKAWA安川
型號：CIMR-J7AU40P7
全國服務熱線：+86 15270269218
手機：+86 15270269218
微信：+86 15270269218
QQ：3136378118
Email：stodcdcs@gmail.com

在線咨詢

產品詳情

產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等。
主營DCS控制系統備件，PLC系統備件及機器人系統備件，
優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
YASKAWA CIMR-J7AU40P7伺服驅動電機模塊

進貨檢驗
檢查交付內容
•DCS 400
•手冊
•安裝模板
•快速安裝和調試指南
檢查貨物是否有任何損壞跡象。如果如果您發現任何問題，請聯系保險公司或供應商。
檢查機組銘牌上的詳細信息
確保在安裝和啟動之前：您已收到正確的單位類型和單位版本如果貨物不完整或包含任何項目不正確，請聯系供應商。
小心！
晶閘管功率轉換器重量相當大因此不應由前蓋保持。
請將裝置放在背上?？偸窃谔幚硌b置時應謹慎，以避免受傷或損壞。儲運如果裝置在安裝前已儲存，或運輸?shù)搅硪粋€位置時，必須注意確保符合環境條件。
銘牌為了便于識別，每個晶閘管功率轉換器配有銘牌，說明類型代碼和序列號，分別用于單位的個人身份。
類型代碼包含有關裝置特性和配置的信息。
技術數據和規范有效期為：即將付印。ABB保留以下權利：隨后的更改。
如果您對駕駛有任何疑問
關于系統，請聯系您當?shù)氐腁BB代理。在運行中，驅動轉換器根據其保護程度，可能帶電、不絕緣，也可能移動或旋轉以及熱表面。
如果不允許移除所需的蓋子，則使用、錯誤安裝或誤操作，存在以下危險：
嚴重人身傷害和財產損失。
有關更多信息，請參閱文檔。
為運輸、安裝和調試服務的所有操作以及由熟練技術人員進行維護人員（遵守IEC 364或CENELEC HD 384或DIN VDE 0100以及IEC 664或DIN/VDE 0110和國家事故預防規則?。?br />在這些基本安全說明中，“熟練技術人員“人員”指熟悉安裝的人員，產品的安裝、調試和運行
履行其職能所需的資格。驅動轉換器是為包含在電氣系統中而設計的部件裝置或機械。
如果安裝在機械中，驅動器的調試
禁止轉換器（即開始正常運行），直到已證明機械符合
指令89/392/EEC（機械安全指令-MSD）。賬戶采用EN 60204。
允許進行調試（即開始正常運行）
僅在符合EMC指令（89/336/EEC）的情況下：已經建立。
驅動轉換器滿足低電壓的要求
指令73/23/EEC。它們受協調標準的約束與EN一起使用的prEN 50178/DIN VDE 0160系列
60439-1/VDE 0660，第500部分和EN 60146/VDE 0558。
技術數據以及與供應有關的信息條件應取自銘牌和文件，并應嚴格遵守。Incoming inspection
Check the contents of delivery
• DCS 400
• Manual
• Mounting template
• Quick installation & commissioning guide
Check the consignment for any signs of damage. If
you find any, please contact the insurance company
or the supplier.
Check the particulars given on the unit's rating plate
to make sure prior to installation and start-up that
you have received the correct unit type and unit
version.
If the consignment is incomplete or contains any
incorrect items, please contact the supplier.
CAUTION!
The thyristor power converter weighs quite a lot and
should therefore not be held by the front cover.
Please put the unit down only on its back. Always
use due care when handling the unit, so as to avoid
injuries or damage.Storage and transport
If the unit had been in storage prior to installation or is
transported to another location, care must be taken to
ensure that the environmental conditions are complied with.
Rating plate
For purposes of identification, each thyristor power
converter is fitted with rating plates, stating the type
code and the serial number, which serve for each
unit's individual identification.
The type code contains information on the characteristics and the configuration of the unit.
The technical data and specifications are valid as of
going to press. ABB reserves the right to make
subsequent alterations.
If you have any questions concerning your drive
system, please contact your local ABB agent.In operation, drive converters, depending on their degree of protection, may have live, uninsulated, and possibly also moving or rotating
parts, as well as hot surfaces.
In case of inadmissible removal of the required covers, of improper
use, wrong installation or maloperation, there is the danger of
serious personal injury and damage to property.
For further information, see documentation.
All operations serving transport, installation and commissioninng as
well as maintenance are to be carried out by skilled technical
personnel (Observe IEC 364 or CENELEC HD 384 or DIN VDE 0100
and IEC 664 or DIN/VDE 0110 and national accident prevention
rules!).
For the purposes of these basic safety instructions, “skilled technical
personnel” means persons who are familiar with the installation,
mounting, commissioning and operation of the product and have the
qualifications needed for the performance of their functions.Drive converters are components designed for inclusion in electrical
installations or machinery.
In case of installation in machinery, commissioning of the drive
converter (i.e. the starting of normal operation) is prohibited until the
machinery has been proved to conform to the provisions of the
directive 89/392/EEC (Machinery Safety Directive - MSD). Account
is to be taken of EN 60204.
Commissioning (i.e. the starting of normal opertion) is admissible
only where conformity with the EMC directive (89/336/EEC) has
been established.
The drive converters meet the requirements of the low-voltage
directive 73/23/EEC. They are subject to the harmonized standards
of the series prEN 50178/DIN VDE 0160 in conjunction with EN
60439-1/ VDE 0660, part 500, and EN 60146/ VDE 0558.
The technical data as well as information concerning the supply
conditions shall be taken from the rating plate and from the documentation and shall be strictly observed.

相關產品

RELIANCE

ABB

GE

FOXBORO

EMERSON艾默生

A-B

MOTOROLA

TRICONEX

HONEYWELL霍尼韋爾

HIMA

140系列PLC

BENTLY本特利

其他

SST

EPRO

YOKOGAWA

MOOG

NI

WOODWARD伍德沃德

METSO

KOLLMORGEN科爾摩根

力士樂

ALSTOM阿爾斯通

YASKAWA安川

AMAT

ICS TRIPLEX

新能源系列

EATON

YASKAWA CIMR-J7AU40P7伺服驅動電機模塊

掃一掃關注微信