YASKAWA UGQMEM-02MNQ23伺服驅動電機模塊

類目：YASKAWA安川
型號：UGQMEM-02MNQ23
全國服務熱線：+86 15270269218
手機：+86 15270269218
微信：+86 15270269218
QQ：3136378118
Email：stodcdcs@gmail.com

在線咨詢

產品詳情

產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等。
主營DCS控制系統備件，PLC系統備件及機器人系統備件，
優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
YASKAWA UGQMEM-02MNQ23伺服驅動電機模塊

運輸、儲存
運輸、儲存和正確使用說明應為：遵守。
氣候條件應符合prEN 50178。設備的安裝和冷卻應符合相關文件中的規范。
驅動轉換器應防止過度應變。特別是，部件不得彎曲或隔離距離在運輸或搬運過程中改變的。任何接觸不得可由電子元件和觸點制成。
驅動轉換器包含靜電敏感組件，其：可能因使用不當而損壞。電氣元件不得機械損壞或破壞（潛在健康風險）。
5.電氣連接
在帶電驅動轉換器上工作時，適用的國家必須遵守事故預防規則（如VBG 4）。
電氣安裝應按照
相關要求（例如導體的橫截面積，熔斷、PE連接）。有關更多信息，請參閱文檔。
符合EMC要求的安裝說明，如屏蔽、接地、過濾器位置和接線
包含在驅動器轉換器文檔中。他們必須永遠也適用于帶有CE標志的驅動轉換器。
遵守EMC法律要求的限值是安裝或機器制造商的責任。
6.操作
包括驅動轉換器的裝置應配備：
附加控制和保護裝置符合相關適用的安全要求，如有關技術設備的法案、事故預防規則等。驅動器的變化允許使用操作軟件進行轉換器。
在驅動轉換器從電壓源斷開之后，不得觸摸帶電設備部件和電源端子由于可能通電的電容器，立即。在這方面，驅動轉換器上的相應標志和標記必須得到尊重。
操作期間，所有蓋子和門應保持關閉。
7.維護和保養
應遵循制造商的文件。此符號警告您注意可能導致人身傷害的高壓人員和/或設備損壞。在適當情況下該符號旁邊印刷的文字描述了此類風險的方式可以避免。
•晶閘管的所有電氣安裝和維護工作
電源轉換器必須由合格人員執行他們在電氣工程方面受過全面培訓。
•晶閘管功率轉換器及其相鄰裝置必須：由合格專業人員適當接地。
•不得對晶閘管電源進行任何操作轉換器仍處于打開狀態。首先關閉裝置，使用一種測量儀器，確保功率轉換器已真正斷電，只有這樣您才能從相關工作開始。
•由于外部控制電路，可能存在危險的高
即使在線路電壓已關閉。因此始終使用
適當的謹慎！不遵守這些指示可能：導致受傷（甚至死亡?。?。Transport, storage
The instructions for transport, storage and proper use shall be
complied with.
The climatic conditions shall be in conformity with prEN 50178.The installation and cooling of the appliances shall be in accordance
with the specifications in the pertinent documentation.
The drive converters shall be protected against excessive strains.
In particular, no components must be bent or isolating distances
altered in the course of transportation or handling. No contact shall
be made with electronic components and contacts.
Drive converters contain electrostatic sensitive components which
are liable to damage through improper use. Electric components
must not be mechanically damaged or destroyed (potential health
risks).
5. Electrical connection
When working on live drive converters, the applicable national
accident prevention rules (e.g. VBG 4) must be complied with.
The electrical installation shall be carried out in accordance with the
relevant requirements (e.g. cross-sectional areas of conductors,
fusing, PE connection). For further information, see documentation.
Instructions for the installation in accordance with EMC requirements, like screening, earthing, location of filters and wiring, are
contained in the drive converter documentation. They must always
be complied with, also for drive converters bearing a CE marking.
Observance of the limit values required by EMC law is the responsibility of the manufacturer of the installation or machine.
6. Operation
Installations which include drive converters shall be equipped with
additional control and protective devices in accordance with the
relevant applicable safety requirements, e.g. Act respecting technical equipment, accident prevention rules etc. Changes to the drive
converters by means of the operating software are admissible.
After disconnection of the drive converter from the voltage supply,
live appliance parts and power terminals must not be touched
immediately because of possibly energized capacitors. In this respect, the corresponding signs and markings on the drive converter
must be respected.
During operation, all covers and doors shall be kept closed.
7. Maintenance and servicing
The manufacturer’s documentation shall be followed.This symbol warns you of high voltages which may result in injuries
to persons and/or damage to equipment. Where appropriate, the
text printed adjacent to this symbol describes how risks of this kind
may be avoided.
• All electrical installation and maintenance work on the thyristor
power converter must be carried out by properly qualified staff
who have been thoroughly trained in electrical engineering.
• The thyristor power converter and its adjacent units must be
properly earthed by qualified professionals.
• You must NEVER perform any work on the thyristor power
converter while it is still switched on. First switch the unit off, use
a measuring instrument to make absolutely sure that the power
converter has really been de-energized, and only then you may
start with the work concerned.
• Due to external control circuits, there may be dangerously high
voltages present at the thyristor power converter even after the
line voltage has been switched off. So always work at the unit with
appropriate caution! Non-compliance with these instructions may
result in injury (or even death!).

相關產品

RELIANCE

ABB

GE

FOXBORO

EMERSON艾默生

A-B

MOTOROLA

TRICONEX

HONEYWELL霍尼韋爾

HIMA

140系列PLC

BENTLY本特利

其他

SST

EPRO

YOKOGAWA

MOOG

NI

WOODWARD伍德沃德

METSO

KOLLMORGEN科爾摩根

力士樂

ALSTOM阿爾斯通

YASKAWA安川

AMAT

ICS TRIPLEX

新能源系列

EATON

YASKAWA UGQMEM-02MNQ23伺服驅動電機模塊

掃一掃關注微信